top of page

Omachron Filtration System Explained

OmahronMask_April032020_SCREEN_5.jpg
BACKGROUND

 

 

Omachron two-stage filtration system captures 99.0% of particles as small as 0.1 micron. 

CROSS SECTION OF A FAN ASSISTED FILTER CARTRIDGE WITH AIRFLOW DIAGRAM

 

 

Fan-assisted air-flow pattern makes breathing through the mask as easy as breathing without a mask. Provides a constant stream of fresh air to prevent build-up of moisture or carbon dioxide.

Fan-assist-air diagram
Two-stage filter
TWO-STAGE FILTRATION SYSTEM: 

First-stage, washable filter captures larger particles .

Second-stage, Teflon filter captures 99.0% of particles as small as 0.1 micron (size of COVID-19 virus).

Filters both the air you breath in and the air you breath out.

Filtration system provides up to 500 hours of use. Filter module easily replaceable.

Filter media has about 75 square inches of pleated filter. This enables user to breath freely with or without fan assistance.

fan-assist-call-outs
OTHER FEATURES OF THE FILTER CARTRIDGE 

 

 

Fan-assisted air flow powered by rechargeable battery (included).

Run for 8+ hours on a single charge.

Fan can continue to operate while battery is connected to a charger for extra hours of use.

Fan can be turned on or off by the user.

Downward-facing air intake protects filters from spray of particles from people coughing or sneezing.

Smooth exterior surfaces make filter housing easy to wipe and keep clean.

HOW TO TAKE CARE OF THE FILTER CARTRIDGE 

Mask with two-stage filtration system
STEP 1

To remove filter cartridge.

 

Mask fully assembled. 

Foam filter removal
STEP 1

To access foam filter.

 

Gently pinch foam.

Pleated filter removal
STEP 1

To access cartridge containing pleated & foam filters.

 

Release cartridge from locking tab, & grab sides of filter case - pull downwardly.

filter cartridge removal
STEP 2

 

 

Rotate filter cartridge clockwise about 45 degrees.

Foam filter removal
STEP 2

 

 

Pull foam downwardly.

Pleated filter removal
STEP 2

 

 

Remove filter case from filter housing.

filter removal from mask
STEP 3

 

 

Separate filter cartridge from mask body.

Foam filter removal
STEP 3

 

 

Remove foam from filter case.

Both filters removal
STEP 3

 

 

Remove foam from filter case.

bottom of page